 |
||||||
 |
 |
|||||
 |
 |
|||||
 |
 |
 |
||||
 |
 |
 |
||||
Selection Guides |
||||||
|
||||||
|
|
|||||
|
|
|||||
|
|
|
||||
|
|
|
||||
| Selection Guides |
||||||
Power and FET Drivers
| Power and FET Drivers (1 of 2 tables, see below) |
Unitrode Part Number |
|||||||
| Power Driver | Quad |
Single |
|
Single |
Dual |
Dual |
Dual Non-Inv. |
|
| FET Driver |
|
|
|
|
|
|
|
|
| Isolated Driver Pairs |
|
|
|
|
|
|
|
Single |
| Relay Drivers |
|
|
Quad |
|
|
|
|
|
| Input Configuration | Non- |
Sink/Source TTL |
Non- |
Comple- |
Comple- |
Comple- |
Inv. |
Non- |
| Enable |
|
|
|
|
|
|
Y |
|
| Inhibit | Y |
|
Y |
|
Y |
Y |
|
|
| Analog Stop |
|
|
|
|
Y |
Y |
|
|
| Output Rise Time (ns) | 250 |
|
|
60 |
60 |
50 |
75 |
40 |
| Maximum Voltage | 36 |
35 |
42.5 |
40 |
40 |
40 |
35 |
40 |
| Peak Output Current (A) | 2.0/1.2 |
4.0 |
50mA per Relay |
1.5 |
1.5 |
1.5 |
3.0 |
1.5 |
| Application/Design Note |
|
|
|
|||||
Power and FET Drivers(2 of 2 tables) |
Unitrode Part Number | ||||||
| UC3710 | UC3711 | UC3714 | UC3715 | UC3724/25 | UC3726/27 | UCC3776 | |
| Power Driver | Single | ||||||
| FET Driver | Single | Dual | Dual | Dual | Single | Quad | |
| Relay Drivers | |||||||
| Isolated Driver Pairs | FET Drv | IGBT Drv | |||||
| Input Configuration | Complementary | Non-Inverting | Non-Inverting | Non-Inverting | Non-Inverting | Non-Inverting | Non-Inverting |
| Enable | Y | Y | Y | ||||
| Inhibit | |||||||
| Analog Stop | |||||||
| Output Rise Time (ns) | 40 | 20 | 100/50 | 100/50 | 30 | 75 | |
| Maximum Voltage | 20 | 40 | 20 | 20 | 40 | 40 | 18 |
| Peak Output Current (A) | 6.0/1.0/2.0 AUX 0.5/1.0 |
1.5/1.0/2.0 AUX 0.5/1.0 |
1.0/2.0 | 1.0/2.0 | 2.0 | 4.0 | 1.5/2.0 |
| Application/Design Note | DN-35, U-127 | DN-57, DN-60, U-143C | |||||
Power Supply |
Unitrode Part Number |
||
| UC3610 | UC3611 | UC3612 | |
| Description | Dual Schottky Diode Bridge | Quad Schottky Diode Array | Dual Schottky Diode |
| Application | Eight-diode Array for High Current, Low Duty Cycle Flyback Voltage Clamping for Inductive Loads | Four-diode Array for High Current Bridges and Voltage Clamps | Two-diode Array for High Current, Low Duty Cycle Flyback Voltage Clamping for Inductive Loads |
| Key Features |
|
|
|
| Special Function Circuits | Unitrode Part Number |
|
| Part Name | Bridge Transducer Switch | Smart Power Switch |
| Description | Contains a Complete Signal Conditioning System to Interface Low-level Variable Impedance Transducers to a Digital System | 65V Universal High or Low Side Driver with Current Limiting |
+ New Product |
||
Last updatd: 05/21/98